SHARE offers nylon monofilament mesh filters to provide a broad
range of mesh for laborary research and development. Our laborary
nylon filters are based on precise mesh openings, open area, thread
diameter, mesh count and mesh thickness.
Polyester mesh filters for laborary are also available on your
request due to its good chemical resistance to certain solvents and acids.
Mesh Opening: The distance between adjacent threads
Open Area: The ratio (%) of the open area to the thread area within
a woven mesh
Mesh Thickness: The average thickness of the woven mesh
Nylon general chemical compatibility
- Nylon is generally chemically resistant to oils and fuels,
gasoline, mineral spirits, and some alcohols.
- Nylon has a high melting point, approximately 428°F to 482°F (220°C to 250°C) for PA6, approximately
509°F (265°C) for PA66.
- NOT compatible with ozone, most acids.
- Various micron ratings and diameters can be tailored on demand.
Technical Specifications
Model Definations:
Micron Rating(um)-SG050047
Diameter(mm)-SG050047
For example, SG050047=Nylon mesh filters, 50 Microns, Diameter 47mm
| Nylon Mesh Filters | Micron Rating | Open Area | Thickness | Diameter | Application |
| Model | μm | % | μm | mm | |
| SG010 | 10 | 6 | 65 | 5, 25, 47, 55, 70, 90, 110, 125, 150, 200 | - Drinking water purification
- Retention of solids in water
- Analysis of carbon's dust
- Clarification of serum
- Analysis of floors
- Pre-filtration of samples before a deep filter
- Cascade filtration systems for high volume samples
- Algae recollections and marine microorganisms
- Paint filtration
- Determination of particles size in abrasion polishing processes
- Security filtration in production lines
|
| SG025 | 25 | 14 | 55 |
| SG035 | 35 | 18 | 65 |
| SG050 | 50 | 37 | 50 |
| SG075 | 75 | 40 | 75 |
| SG100 | 100 | 44 | 80 |
| SG150 | 150 | 43 | 120 |
| SG200 | 200 | 48 | 135 |
| SG250 | 250 | 53 | 160 |
| SG500 | 500 | 50 | 190 |
| SG750 | 750 | 49 | 240 |
| SG900 | 900 | 52 | 30 |
Micron ratings from 3um to 2500um available.
Real Images
Your Benefits
- Wide range of filter materials(mainly in nylon, polyester,
polypropylene, stainless steel) and micron sizes available
- Supplied in the form of rolls, pieces, shapes, ribbons, tubes,
bags, plastic molded filters
- Precision unifom mesh opening and clean smooth surface
- Custom cutting and molding service, tight tolerances
- Unlimited shapes, non-fraying sealed edges
- Free samples
- 2 days or less lead time
About us
Established in 1983, Taizhou Share Filters Co., Ltd. has been
producing a comprehensive range of woven monofilament filter mesh
fabrics(nylon, polyester, polypropylene, stainless steel etc.) with micron ratings ranging from 3um to 4mm. We specialize in
engineering woven fabrics into finished or partly finished products
including:
 | Monofilament Mesh Rolls - 30 years of experience & capabilities
- PA, PET, PP, PE, PPS, PEEK etc.
- Characterized by precise mesh opening, open area and thickness
- Excellent converting capabilities from yarn over weaving to
converted items
|
 | Discs, Tubes, Ribbons, Bags - Cutting, calendering, welding, slitting, sewing, pleating, molding
- Discs, tubes, ribbons, bags etc.
- Various converting capabilities by stamping or slitting technology:
cold, heat, laser, ultrasonic
- Clean, smooth & closed edge quality
- Maximum compatibility with injection molding process
|
 | Plastic Molded Filters - Insert molding and over molding
- Mold design, modeling, prototyping, manufacturing and testing
- High efficiency, excellent particles holding capacity and low
pressure drop
- High stability, repeatability and reliability
- Extensive material options and industry-best lead times
|
Contact us today and SHARE application specialists with decades of
experience will help you create the best filter solution for your
application.
For mesh rolls:
1. Rolled on the paper core, 30-70m/roll, packed into PE bags, the product label is attached on the edge of each roll
2. 2-8 rolls per standard export carton
3. Put into PP woven bag to prevent damage during transportation
4. Package belt strengthen
For fabricated & molded filters:
1. Packed into sealed PE bags, 10pcs to 500pcs/bag according to the
actual size, double bagged and the product label is attached in the
inner bag
2. Put into bigger PE bag and then standard export carton
3. Wrapped the outer carton with PE stretch film to prevent damage
during transportation
4. Package belt strengthen if pallets are available
The label contains the following standard information:
item name, manufacturer, material, dimensions, manufacturing date,
order number, batch number etc.
| Port to Port | Door to Door |
| Express(DHL,UPS,FEDEX, EMS) | | 1 - 5 days |
| Air Freight | 1 - 5 days | 4 - 10 days |
| Sea Freight(FCL) | 15 - 30 days | 20 - 35 days |
| Sea Freight(LCL) | 15 - 30 days | 22 - 37 days |
FAQ
1. Where is your factory located? How can I visit there?
We are in Taizhou city, Zhejiang province China. By train, we are
one hour away from Hangzhou and two hours away from Shanghai.
2. Can I get free samples and how long can you deliver them?
We are pleased to provide you with free samples for your evaluation, which will be sent to you within 2 days. Please feel free to reach out to us for samples.
3. How long does a quotation take?
In most cases, we respond within 2 days. If something in RFQ need be confirmed, we will promptly
notify you soon.
4. How quickly can I get my order finished?
The production lead time is dependent on the quantity. Typically,
it takes 5 to 15 working days for us to complete mass production once you have
placed the order.
5. What about your quality control?
By visual inspection, optical or pressure sensitive equipment and
automated 3D image-inspection equipment, our production operators
conduct self-inspections at every stage of the process.
Additionally, we have spot inspections and final inspections
carried out by our Quality Control (QC) team.
6. What's your largest advantage?
One of our core competencies is our excellent converting
capabilities from yarn over weaving to converted items with
professional technical team and quality guarantee and management
for more than 30 years.
7. What kind of payment terms do you accept?
T/T and LC and more.
