Nylon biopsy bags are specialized medical containers designed for
the safe and efficient collection, storage, and transportation of
biopsy samples and tissue specimens. SHARE nylon biopsy bags are
made of solvent resistant nylon monofilament filter mesh, ensuring
the preservation and integrity of the collected samples during
handling and analysis.
Our biopsy bags are excellent for extracting biopsy and biopsies and specimen collection when processing small biopsies. They provide high fluid exchange
and tissue safety during preservation and fixation.
The fixative solution and specimen can be poured into the bag,
which then filters the fixative and leaves the biopsies inside. The
bag is then sealed, placed in a biopsy cassette and processed as
usual. After processing, the bag can be pulled out and opened so that the
sample can be collected. The high quality biopsy bags reduce the
risk of losing small samples during tissue processing and provide
excellent fluid exchange. The material and mesh size of the bags
allow easy opening during processing.
SHARE Converting Capabilities
 SHARE Fabricated Product | SHARE Fabrication Capabilities |
| COLD | HEAT | ULTRASONICS | LASER |
| Continuous & tubular ribbons | Ribbon | Ribbon | Ribbon | |
| Double seam tubular ribbon | Double seam tubular ribbon | |
| Multiple layer ribbon | Multiple Layer ribbon | |
| | Multiple layer tubular ribbon | |
| | Single seam tubular
ribbon | |
| Tubes & Rectangles | Filter segment, two sides heat cut,
two sides cold cut | Rectangle, four sides
ultrasonically cut | |
| Rectangle, two sides heat cut and two sides ultrasonically cut | |
| Tube, two open ends | Tube, two open ends,
hot wire cut | | |
| | Tube, one end sealed | Tube, two open ends, laser cut |
| | Tube special execution
(single/double layer) | |
| | Biopsy bag with or
without flaps | |
| Shapes | Cold punched part
(single layer) | | Punched part
(single or multiple layer) | Single layer shapes, laser cut |
| Pleated Element | | | Pleated pack
(ultrasonically cross cut) | |
| | Pleated cartridges
(ultrasonically sealed) | |
Cone Shaped
(Truncated) | | | Single seam | |
| Double seam
(single/double layer) | |
Customers have different requirements for filtration, separation and sifting, and relying only on single fabrication technology is not
sufficient to meet the challenges of today's demanding filtration market.
Therefore, SHARE has developed expertises and experiences in almost
all processing technologies including cutting, stitching, gluing, welding, laser cutting,
molding and more after decades of developments.
1. Laser Cutting
Laser cutting produces highly precise fabric parts with
a heat-sealed edge.
Share uses different laser cutting systems to meet
customers various requirements including
semi-automated vision systems
and fully automated with AI programming.
2. Heat Slitting
Heated knives are used to create fabric strips/ribbons for much
many applications such as injection molding, and hot-cut mesh edges
are melted to enhance durability.
Optical measuring systems measure ribbon width with tight
tolerances.
3. Ultrasonic Slitting
Ultrasonic slitting are often used to produce fabric strips
with closed edge, minimal material build-up.
Ultrasonic cutting is ideal for precise and clean edge
quality, and measurements are conducted using
optical systems too.
4. Ultrasonic Stamping
Often used for highly precise fabric parts.
Ultrasonic stamping ensures tight geometric tolerances. The edges
are non-fraying. One tool is used for punching and can be used for
larger quantities. Optical measuring systems measure dimensions and
tolerances.
5. Ultrasonic Welding
Ultrasonic welding has accurate, clean welds without
introducing secondary materials.
SHARE produces precision plastic cylindrical filters
by using ultrasonic welded tubes.
6. Pleating
We increase the filter surface through pleating. Fabrics are
firstly welded then pleated together, and cut to size of pleats.
7. Sewing
Sewing and stitching are very suitable for various of mesh
filter bags.
The thread, patch and stitch can be customized
on demand.
8. Plastic Injection Molding
Share plastic filters provide h igh flow rates and low pressure drops by maximum open area.
SHARE process our mesh fabrics to various plastic molded filters
for automotive, chemical, medical, home appliance and f ood industry by plastic insert molding and overmolding technologies.
Company Profile
Established in 1983, Taizhou Share Filters Co., Ltd. offers a
comprehensive range of woven monofilament filter mesh
fabrics(nylon, polyester, polypropylene etc.) with micron ratings
ranging from 3um to 4mm. We specialize in engineering woven fabrics
into finished or partly finished products.
Our products ranges:
- Monofilament Mesh Rolls
- Discs, Tubes, Ribbons, Bags
- Plastic Molded Filters
Whether you want to improve the quality or reduce the cost of your
existing filter component, plan a new filtration application, or
need assistance with specifications and design validation, SHARE
application specialists with decades of experience will help you
create the best filter solution for your application.
Contact SHARE today for additional information and how we can help
you with your specific filtration requirements.
Packaging & Shipping
For mesh rolls:
1. Rolled on the paper core, 30-70m/roll, packed into PE bags, the product label is attached on the edge of each roll
2. 2-8 rolls per standard export carton
3. Put into PP woven bag to prevent damage during transportation
4. Package belt strengthen
For fabricated&molded filters:
1. Packed into sealed PE bags, 10pcs to 500pcs/bag according to the
actual size, double bagged and the product label is attached in the
inner bag
2. Put into bigger PE bag and then standard export carton
3. Wrapped the outer carton with PE stretch film to prevent damage
during transportation
4. Package belt strengthen if pallets are available
The label contains the following standard information:
item name, manufacturer, material, dimensions, manufacturing date,
order number, batch number etc.
| Port to Port | Door to Door |
| Express(DHL,UPS,FEDEX, EMS) | | 1 - 5 days |
| Air Freight | 1 - 5 days | 4 - 10 days |
| Sea Freight(FCL) | 15 - 30 days | 20 - 35 days |
| Sea Freight(LCL) | 15 - 30 days | 22 - 37 days |
FAQ
1. Where is your factory located? How can I visit there?
We are in Taizhou city, Zhejiang province China. By train, we are
one hour away from Hangzhou and two hours away from Shanghai.
2. Can I get free samples and how long can you deliver them?
We are pleased to provide you with free samples for your evaluation, which will be sent to you within 2 days. Please feel free to reach out to us for samples.
3. How long does a quotation take?
In most cases, we respond within 2 days. If something in RFQ need be confirmed, we will promptly
notify you soon.
4. How quickly can I get my order finished?
The production lead time is dependent on the quantity. Typically,
it takes 5 to 15 working days for us to complete mass production once you have
placed the order.
5. What about your quality control?
By visual inspection, optical or pressure sensitive equipment and
automated 3D image-inspection equipment, our production operators
conduct self-inspections at every stage of the process.
Additionally, we have spot inspections and final inspections
carried out by our Quality Control (QC) team.
6. What's your largest advantage?
One of our core competencies is our excellent converting
capabilities from yarn over weaving to converted items with
professional technical team and quality guarantee and management
for more than 30 years.
7. What kind of payment terms do you accept?
T/T and LC and more.
Instructions:
